Low Profile PCI-E 5.0 PCI Express 4.0 X4 Lane to M.2 NGFF M-Key SSD NVME Adapter Card with Heat Sink
1) ) Selected 4-layer high-density PCB substrate with gold-plated surface treatment ensures zero loss of PCIe 4.0/5.0 UHF signal (32GT/s) transmission and maintains 128GB/s bi-directional bandwidth performance perfectly.
2) Low Profile design: The low profile type Allowing you to connect it to 1U PCI-E port, even if space around the port is limited.
3) PCIe 5.0/4.0 signal: This adapter is just a pass-through adapter card, no driver required, the driver depends on the driver of the hardware device you plug in; This adapter supports the latest PCIe 5.0 SSDs and is backward compatible with PCIe 4.0 and 3.0.
4) Compatible with 2230/2242/2260/2280 M.2 PCIE NVMe M-Key SSDs. PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.
5) Expansion card support: PCIe 4X / 8X / 16X, M-Key PCIE to M.2 adapter; PCI-E 1x and PCI slots are not supported; MSATA and B-KEY interfaces are not supported; The adapter uses the NVMe protocol and PCI-E lanes, the maximum read speed reaches 32 Gbp/s (theoretical speed). This greatly reduces the transfer time for large files. The actual transfer speed depends on the device interface and working environment.
6) Aluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.
